Doro 740 manual Belt clip, Battery

English

Installation

Belt clip

A belt clip is included, which can be fitted on the back of the handset. The belt clip enables the handset to be attached to a belt, waistband or similar. To attach the clip, align it with the indents on the side of the handset and press it into place over the back of the handset.

Battery

The telephone is supplied with environmentally-friendly nickel metal hydride (NiMH) batteries - 2 x AAA 1.2V. As with all batteries, performance may degrade over time; should you notice that talk and standby times has reduced considerably or there are signs of leakage, the batteries should be replaced.

Fully-charged batteries will last for approx. 100 hours in standby or approx. 14 hours’ call time. These operation times apply at normal room temperature.

Full battery capacity will be achieved once the batteries have been charged 4-5 times. Completely discharged batteries will take about 8 hours to fully recharge.

Please note that the battery indicator in the handset display rotates while charging and will stop when the battery is fully charged.

The base unit has an automatic charging mechanism that prevents the batteries from being overcharged or damaged by prolonged charging.

Please note!

To ensure and maintain good charging of the handset we recommend that the base and handset charging contacts are cleaned regularly, ie monthly, with a pencil eraser and/or soft dry cloth. The recharging system used in this model may result in the handset and the batteries becoming warm. This is normal and will not damage the equipment.

When the telephone is installed for the first time, the batteries must be charged for 24 hours before using the telephone. Use original batteries only. The guarantee does not cover any damage caused by use of incorrect batteries.

www.doro.com