TROUBLESHOOTING
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
TROUBLE! SAW WILL NOT START |
|
WHAT’S WRONG? | WHAT TO DO… |
1.Saw not plugged in. | 1.Plug in saw. |
2.Fuse blown or circuit breaker tripped. | 2.Replace fuse or reset |
| circuit breaker. |
3.Cord damaged. | 3.Have cord replaced by |
| authorized service center. |
4.Brushes worn out. | 4.Have brushes replaced |
| by authorized service center. |
TROUBLE! SAW MAKES UNSATISFACTORY CUTS | |
WHAT’S WRONG? | WHAT TO DO… |
1.Dull blade. | 1.Replace blade. |
2.Blade mounted backwards. | 2.Turn blade around. |
3.Gum or pitch on blade. | 3.Remove blade and |
| clean with turpentine. |
4.Incorrect blade for work being done. | 4.Change the blade. |
TROUBLE! BLADE DOES NOT COME UP TO SPEED | |
WHAT’S WRONG? | WHAT TO DO… |
1.Extension cord too light or too long. | 1.Replace with adequate |
| size cord. |
2.Low house current. | 2.Contact your electric |
| company. |
TROUBLE! MACHINE VIBRATES EXCESSIVELY | |
WHAT’S WRONG? | WHAT TO DO… |
1.Stand or bench on uneven floor. | 1.Reposition on flat level |
| surface. |
2.Damaged saw blade. | 2.Replace blade. |
For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the DELTA Machinery help line at
25
