5716 Dremel 2.625x4.25 6/18/02 10:31 AM Page 20

CLEANING

To avoid accidents always ! WARNING disconnect the tool from

the power supply before cleaning or performing any maintenance. The Mini Saw Attachment may be cleaned most effectively with a damp cotton swab or compressed dry air.

Always wear safety goggles when cleaning tools with compressed air.

Ventilation openings and switch levers must be kept clean and free of foreign matter. Do not attempt to clean by inserting pointed objects through openings.

! CAUTION

Certain cleaning agents and

solvents damage plastic parts.

 

Some of these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain ammonia.

CARE OF BLADES

When cleaning gum and wood pitch from blade, unplug the rotary tool and remove the blade. Remember, blades are designed to cut, so handle carefully. Wipe the blade with kerosene or similar solvent to remove the gum and pitch.

A dull or damaged blade slows the speed of cutting and places a heavier load on your rotary tool, and can cause KICKBACK. Keep extra blades on hand so you always have sharp, efficient blades ready to replace a dull or damaged one.

Use only Dremel Saw Blades with your saw attachment.

Blades become dull even from cutting regular lumber. If you find yourself forcing the rotary tool forward to cut instead of just guiding it through the cut, chances are the blade is dull or coated with wood pitch.

20

21

Page 11
Image 11
Dremel 670 manual Cleaning, Care of Blades, Certain cleaning agents