Dremel 800 owner manual Symbols, Name, Designation/Explanation

DM 2610919778 8-03 8/4/03 4:06 PM Page 6

Symbols

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

Symbol				Name	Designation/Explanation
			V	Volts	Voltage (potential)
			A	Amperes	Current
		Hz		Hertz	Frequency (cycles per second)
		W		Watt	Power
		kg		Kilograms	Weight
	min			Minutes	Time
			s	Seconds	Time
				Diameter	Size of drill bits, grinding wheels, etc.
		n0		No load speed	Rotational speed, at no load
.../min				Revolutions or reciprocation per minute	Revolutions, strokes, surface speed,
					orbits etc. per minute
0				Off position	Zero speed, zero torque...
1, 2, 3, ...				Selector settings	Speed, torque or position settings.
I, II, III,					Higher number means greater speed
0				Infinitely variable selector with off	Speed is increasing from 0 setting
				Arrow	Action in the direction of arrow
				Alternating current	Type or a characteristic of current
				Direct current	Type or a characteristic of current
				Alternating or direct current	Type or a characteristic of current
				Class II construction	Designates Double Insulated Construction tools.
				Earthing terminal	Grounding terminal
				Warning symbol	Alerts user to warning messages

Li-ion RBRC seal

Designates Li-ion battery recycling program

This symbol designates that this tool is listed by Underwriters Laboratories.

This symbol designates that this tool is listed by the Canadian Standards Association, and is listed to US Standards by CSA.

This symbol designates that this tool is recognized by Underwriters Laboratories.

This symbol designates that this tool is listed by Underwriters Laboratories, and listed to Canadian Standards by Underwriters Laboratories.

This symbol designates that

this tool complies to NOM Mexican Standards.

Page 6