6

Assembly Instructions Cont.

Method A

Installation of the motor when bed frame is on its side

A1. Prior to installation, make sure that the 2 white motor blocks are in the retracted position.

CORRECT

INCORRECT

Actuator Bar

Flange

A2. Align the opening on the head end of the motor with the flange on the head section of the bed and insert the flange into the motor compartment.

A3. With the palm of your hand, snap the motor flush to the actuator bar.

A4. Align the opening on the foot end of the motor with the flange on the foot section of the bed and insert the flange into the motor compartment.

A5. With the palm of your hand, snap the motor flush to the actuator bar.

REV3.1.23.14

Page 6
Image 6
Drive Medical Design 15560 manual Correct Incorrect