LEVELING THE UNIT
•Now that the stove is in place and properly hooked up to the chimney, you have to adjust the level on the burner.
•Put the level in the middle of the burner paralleled to the door. (Figure 9A). Screw or
unscrew the adjustable legs to level the burner with a 7/16" key.
•Put the level in the middle of the burner
parallel to the sides. (Figure 9B). Screw or unscrew the adjustable legs to level the burner with a 7/16" key.
Figure 9A: LEVELLING THE BURNER
IMPORTANT :
IT IS VERY IMPORTANT TO LEVEL THE
BURNER TO ALLOW A PROPER OIL VAPOR
DISTRIBUTION THROUGH THE RINGS, AND A
BETTER OIL INLET.
Figure 9B: LEVELLING THE BURNER
FIXATION OF STOVE TO FLOOR
•The unit has to be stabilized in its location using the two fixation brackets. Install the brackets on the two back adjustable legs. (figure 11)
•If the flooring is made of combustible material it would be preferable to install the unit on an non combustible surface covering at least the dimensions of the stove.
Figure 10: INSTALLATION OF FIXATION
BRACKETS
Page 5 of 15