OPERATION INSTRUCTIONS
COMBUSTIBLE
•Your stove has been design to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL OR ANY OIL CONTAINING GASOLINE. Drolet Stoves & Fireplaces declines all responsibility regarding damage cause by using other combustibles.
•Best results are obtained when using oil #1. Make sure to use oil without impurities wich may plug filters and valve’s orifice. Impurities only give an improper combustion.
LIGHTING
BEFORE LIGHTING
•make sure that : The tank is full;
The isolating valve is open;
•See that the (3) rings are in the right position. Each of them are stamped A, B and C (figure 13).
•Make sure that the flow regulating handle is in the « 0 » position (figure 14b).
•If it’s not already done, arm down the valve’s lever located behind the stove (figure 14A).
•Wait for the valve to fill up and let the level stabilize.
•BEFORE ATTEMPTING TO LIGHT YOUR STOVE, MAKE SURE THAT THE FLOW REGULATING HANDLE IS IN THE 0 POSITION.
Figure 13: RINGS POSITION
Figure 14B: CONSTANT LEVEL FLOW CONTROL VALVE (CARBURATOR)
Figure 14B: ARMING / DEARMING FLOW CONTROL VALVE (CARBURATOR).
Page 8 of 15
