Drolet ALASKA 2000 manual Connecting The Stove To The Chimney

CONNECTING THE STOVE TO THE CHIMNEY

•The gases are vented from he back of the unit. The female part of the black pipe connector has to be installed toward the flue connector of the stove. Secure all connections with the (3) self taping screws, with 120o distance between each of them.

•The connection between stove pipes and chimney has to be perfectly sealed.

•A maximum horizontal lent of 5' is allowed. Make sure to have a 1/4" slope per foot minimum.

•Do not use more than two 90o Elbows while connecting the stove to the chimney.

•It is strictly forbidden to pass through combustible materials walls, floors and ceilings with stove pipe connectors. Ref : Standard B-139 4.2.5.5.

• DIRECT HORIZONTAL CONNECTION :	• CEILING CONNECTION :
You may choose to connect your stove to	In the case where your chimney starts from
the chimney with an horizontal flue pipe.	the ceiling, use one 90º elbow and the
	necessary straight sections.

Figure 6:		HORIZONTAL CONNECTION .			Figure 7:	CEILING CONNECTION .
•	DO NOT CONNECT MORE THAN ONE				• VERTICAL CONNECTION :
					IT is recommended to not use more than two
	STOVE TO YOUR CHIMNEY.
					(2) 90º elbows and the necessary straight
• FIX		FLUE PIPES TOGETHER		WITH	sections	to connect your stove to the
	METAL SCREWS.				chimney.
• MAKE SURE YOU RESPECT A ¼’’ SLOPE
	PER FOOT OF HORIZONTAL PIPE
	LENGTH.
• RESPECT CAREFULLY CLEARANCES TO
	COMBUSTIBLES PRESCRIBED BY FLUE
	PIPES MANUFACTURERS.
•	FLUE	PIPES	CLEARANCES	TO
	COMBUSTIBLES		DEPEND ON	FLUE
	PIPES TYPE AND MANUFACTURERS				Figure 8:	VERTICAL CONNECTION .

Page 4 of 15