General Information
Unpacking
The carton and shipping materials used to protect your new Dual DVD player during shipment were specipcally designed to cushion it from shock and vibration. We suggest that you save this carton and packing materials for use in shipping if you move, or should the system ever needs repair.
Check that you have the following items:
•One DVD player/receiver
•One
white connectors for connecting the composite audio outputs from this unit to your television.
•One
•One full function ergonomic remote control
•Owner’ s Manual and warranty
Disc handling and cleaning
Disc handling precautions
•To keep the disc clean, handle the disc by its edge. Do not touch the surface.
•Do not stick paper or tape on the disc.
•If there is glue (or a similar substance) on the disc, remove the glue completely before using the disc.
•Do not expose the disc to direct sunlight or sources such as hot air ducts, or leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car.
•After playing, store the disc in its case.
•Do not write on the label side with a
•Be careful not to drop or bend the disc.
Disc cleaning precautions
•Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out.
Disc handling and cleaning
•Do not use solvents such as benzine, thinner, com- mercially available cleaners or
Disc installing precautions
•Do not install more than 1 disc on disc tray.
•Do not place the disc on the tray
•Do not try to close the disc tray when the disc is not installed properly.
DVD Audio discs
•DVDAudio provides the audiophile listening quality of vinyl record Hi Fi with 5.1 discrete channels of sound.
•DVD Audio discs are not subject to region codes, so any DVD Audio disc will play on this unit.
•While most DVD Audio discs contain graphics and lyrics, they usually do not contain real time video images.
•The DVD Audio light on the front panel display sig- nifies that a DVD Audio disc is playing.
Inserting batteries into the remote control
You can control the system using the supplied remote control. Insert twoAAbatteries (not included) by matching the + and - on the batteries. When using the remote control, point it at the remote sensor on the front panel of this system.
+
Notes
•Do not leave the remote in an extermely hot or hu- mid place.
•Do not use a new battery with an old one.
•Do not drop any foreign object into the remote cas- ing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so many cause a mal- function.
•If you will not use the remote for an extended period of time, remove the batteries to avoid possible dam- age from battery leakage and corrosion.
7