Dual MXDM66 AM/FM Tuner Operation, Seek Tuning Manual Tuning Scan Tuning Band, Preset Scan

MXDM66 OPERATION

General Operation

MXDM66 OPERATION

AM/FM Tuner Operation

Escape

Audio

Bass

Treble

Balance

Fader

Subwoofer

Source Volume Level

Press ESC to exit any menu adjustment mode.

Press AUDIO/MENU momentarily to select between Volume (default), Bass, Treble, Balance, Fader, Subwoofer and Source Volume Level.

VOLUME BASSTREBLEBALANCEFADERSUBWOOFERSOURCE LEVEL

Press AUDIO/MENU until BASS appears, then press SELECT to confirm. Rotate encoder left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until TREBLE appears, then press SELECT to confirm. Rotate encoder left/right to adjust ( -6 minimum / +6 maximum).

Note: Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Note: Bass and Treble settings are retained for each mode individually.

Press AUDIO/MENU until BAL appears, then press SELECT to confirm. Rotate encoder left/right to adjust (BAL L 12-BAL 00-BAL R 12). BAL 00 represents equal balance.

Press AUDIO/MENU until FADER appears, then press SELECT to confirm. Rotate encoder left/right to adjust (FAD F 12-FAD 00-FAD R 12). FAD 00 represents equal fader.

Press AUDIO/MENU until SUB-Wappears, then press SELECT to confirm. Rotate encoder left/right to adjust (0-12). Adjusting levels to 0 turns the subwoofer off.

The source volume level control allows a gain adjustment for each audio source: AM, FM, CD, AUX and USB. Set the source volume level for each mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO/MENU until SRC LEVEL appears. After one second, the current mode will appear on the display. Turn the rotary encoder to adjust the audio level of the current source (-6 minimum/+6 maximum).

Note: Only the current mode will be available for adjustment. To adjust another mode of operation, press MODE until the desired mode is selected, then set the source volume level for that mode.

Seek Tuning

Manual Tuning

Scan Tuning

Band

Storing and Recalling Station Presets

Preset Scan

Press TUNE nnor TUNE llfor more than one second to seek the next strong station.

Press TUNE nnor TUNE llmomentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly.

Press SCAN to preview strong stations on the current band, pausing for five seconds at each. Press SCAN again to cancel.

Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands.

Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than

two seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button.

Press PS for more than two seconds to scan presets 1-6 on the current band, pausing for five seconds at each. Press PS again to cancel.

8

9