Dual XDVD8130 owner manual DVD Operation

XDVD8130 OPERATION

DVD Operation

Insert Disc

Eject Disc

Playback Start

Playback Stop

Playback Full Stop

Pause

Chapter Select

Fast Forward and Reverse

Press EJECT to allow the rear panel to slide down. With the label facing up, insert a disc at least half way into the disc slot. The disc will auto-load and the rear panel will close. Some discs will play automatically when inserted.

Press EJECT to allow the rear panel to slide down and eject the disc. If the disc is not removed within 10 seconds, the unit will reload the disc automatically. The unit does not have to be turned on.

In general, pressing l/ II or ENTER will start disc playback. Some discs will play automatically when inserted.

““ may appear on the display during operation.

““means that feature or operation is not permitted by the DVD player at this time.

Press  momentarily. The unit will return to the start-up logo and display II . If l/ II is pressed, the unit will resume operation from the last position in memory.

Press  two times. The unit will return to the start-up logo and display . If l/ II is pressed, the unit will resume operation from the beginning of the disc.

Press l/ II to temporarily stop playback.

Press l/ II to resume playback.

Press  to skip to the beginning of the next chapter. Press  to return to the beginning of the current chapter. Pressing  again skips to the beginning of the previous chapter.

Press  or  for more than 2 seconds to fast forward or fast reverse in 2, 4, 16 and 100 times modes. Press l/ II to cancel fast forward or fast reverse. There is no audio output during the fast forward or reverse modes.

20