Dukane 28A8035 Connection to the video signal terminals, Connection to the RGB signal terminal

Connection to the video signal terminals

1. Input signal

S-VIDEO signal		Luminance signal	1.0Vp-p, 75Ω termination
		Chrominance signal	0.286Vp-p (burst signal), 75Ω termination
VIDEO signal			1.0Vp-p, 75Ω termination
AUDIO signal	Input		200mVrms, 20kΩ below (MAX 3.0Vp-p)
	Output		0~200mVrms, 1kΩ

2. Signal input terminal

Chrominance signal Luminance signal

	Ground	Ground
	S VIDEO input (Mini DIN4 pin)
Caution	Video input signal terminals have priority in the following order.
	1 S-VIDEO input terminal 2 RCA jack input terminal

Even when the video signal is displayed, only an audio signal is output to RGB audio output terminals.

Connection to the RGB signal terminal

1. Input / output signal

Video signal		Analog 0.7Vp-p 75Ω termination (Positive polarity)
Horizontal sync signal		TTL level (Positive/negative polarity)
Vertical sync signal		TTL level (Positive/negative polarity)
Composite sync signal		TTL level
Audio signal	Input	200mVrms, 20kΩ below (MAX 3.0Vp-p)
	Output	0~200mVrms, 1kΩ

2. Signal input / output terminal

1	Video signal (Red)	9	N.C
2	Video signal (Green)	10	Ground
3	Video signal (Blue)	11	N.C
4	N.C	12	DDC (Display Data channel) RGB1 only
5	N.C	13	Horizontal/Composite sync signal
6	Ground (for R)	14	Vertical sync signal
7	Ground (for G)	15	DDC (Display Data channel) RGB1 only
8	Ground (for B)

5 1

106

15 11

D-sub 15pin shrink terminal (Female)

Caution	Do not use RGB cable other than that specified.
	Some RGB cable may not operate DDC (Display Data Channel)
	because there are not connect from pin NO. 15 to pin NO. 12 .

20