58+&'1864%#/'4#
SOURCE NAME MENU *Right side of the menu is blank until a name is specified

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the buttons ▲/▼ turns on/off the message function.

TURN ON ó TURN OFF

 

When the TURN ON is selected, the following message function works.

 

“AUTO IN PROGRESS” while automatically adjusting

 

”NO INPUT IS DETECTED”

 

”SYNC IS OUT OF RANGE”

 

"Searching….” while searching for the input

MESSAGE

”Detecting….” while an input signal is detected

 

The indication of the input signal displayed by changing

 

The indication of the aspect ratio displayed by changing

 

The indication of the My Memory displayed by changing

 

The indication of the Picture Mode displayed by changing

 

The indication of "FREEZE" and "II" while freezing the screen by

 

pressing the FREEZE button.

When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22).

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ buttons on the SCREEN

menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SCREEN NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed.

 

 

 

         

SOURCE NAME name can be a maximum of 16 characters.

'5%

 

'06'4  0':6

Once a character in the name is selected

'5%37+6

 

(3) The current name will be displayed

 

 

 

on the first line. Use the ◄/►/▲/▼ and

 

 

 

ENTER or INPUT buttons to select and

 

 

 

enter characters. The RESET button can

 

Q R S T U V W X Y Z [ \

be used to erase 1 character at a time. The

 

 A    ! 

 

(4) To change an already inserted character,

 

Q R AS TUV!WXYZ[\

buttons to select character to be changed.

 

press the ▲ button while the cursor is on the

 

C D E F G H I J K L M NOP

[A-N] row to move the cursor to the name

 

displayed on the first line and use the ◄/►

 

use the ▼ button to move the cursor back

 

 

 

down to the character entry area to select

 

 

 

and enter characters as described above.

 

C D E F G H I J K L M N O P

 

       

 

 A !

'06'40':6

'5%37+6

(5) Select

and press the ENTER or

 

 

 

INPUT buttons when finished entering text.

 

Q R S T U V W X Y Z[\

To revert to the previous name without

 

 

 

saving changes press the ESC or ◄ button

 

 

 

and the INPUT button simultaneously.

 

 

 

 

 

 

 

39

Page 41
Image 41
Dukane 401-8755E-01 user manual Message