
IMAGE Menu
IMAGE
Menu
With the IMAGE menu, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
72 | *215+6+10 | |
%4'' | *#5' | |
126+10 | 5+<' | |
'#5;/'07 | #76 #&,756 ':'%76' | |
|
|
Item | Description | |
|
| |
| Using the buttons ▲/▼ switches the mode for aspect ratio. | |
| For an RGB signal | |
| NORMAL ó 4:3 ó 16:9 ó SMALL | |
ASPECT | For a video signal, | |
4:3 ó 16:9 ó 14:9 ó SMALL | ||
| ||
| For a no signal | |
| 4:3 (fixed) | |
| • The NORMAL mode keeps the original aspect ratio of the signal. | |
| Using the buttons ▲/▼ adjusts the | |
OVER SCAN | Large (It reduces picture) ó Small (It magnifies picture) | |
• This item can be selected only for a video, | ||
| • When this adjustment is too large, certain degradation may appear | |
| at the frame area of the picture. In such a case, please adjust small. | |
| Using the buttons ▲/▼ adjusts the vertical position. | |
| Up ó Down | |
| • | |
V POSITION | on the screen. If this occurs please reset the vertical position to the | |
default setting. Pressing the RESET button when V POSITION is | ||
| selected will reset the V POSITION to the default setting. | |
| For a video signal, | |
| The adjustable range of V.POSITION depends on the OVERSCAN setting. | |
| It is not possible to adjust when the OVERSCAN is set to 10. | |
| Using the buttons ▲/▼ adjusts the horizontal position. | |
| Left ó Right | |
| • | |
H POSITION | on the screen. If this occurs please reset the horizontal position to | |
the default setting. Pressing the RESET button when H POSITION | ||
| is selected will reset the H POSITION to the default setting. | |
| For a video signal, | |
| The adjustable range of H.POSITION depends on the OVERSCAN setting. | |
| It is not possible to adjust when the OVERSCAN is set to 10. | |
| Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker. | |
H PHASE | Right ó Left | |
• This item can be selected only for an RGB signal or a component | ||
| ||
| video signal. |
30