Warranty and after-service, Specifications | Dukane 401-8755E-01

Warranty And After-Service

Warranty and after-service

If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through the suggested checks. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied.

Specifications

Specifications

NOTE • These specifications are subject to change without notice.

		Item			Specification

Product name				Liquid crystal projector
Liquid		Panel size		1.6 cm (0.63 type)
Crystal	Drive system			TFT active matrix
panel
panel		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
		Pixels		786,432 pixels (1024 horizontal x 768 vertical)
Lens				Zoom lens F=1.7 ~ 1.9 f=18.9 ~ 22.6 mm
Lamp				200W UHB
Speaker				1W x 1
Power Supply				AC100-120V/3.3A, AC220-240V/1.4A
Power Consumption				310W
Temperature range				5 ~ 35°C (Operating)
				306 (W) x 86 (H) x 249 (D) mm
Size				(Not including protruding parts)
				• Please refer to the following figure.
Weight (mass)				3.0 kg
				RGB input:		Audio output:
				RGB IN1...	D-sub 15pin mini x1	AUDIO OUT .....Stereo mini x1
				RGB IN2...	D-sub 15pin mini x1	Video input:
				RGB output:		COMPONENT VIDEO
Ports				RGB OUT..D-sub 15pin mini x1		(Y, CB/PB, CR/PR)		...... RCA x3
Ports				Audio input:		S-Video		Mini DIN x1
				AUDIO 1	Stereo mini x1	Video		RCA x1
				AUDIO 2	Stereo mini x1	Communication port:
				AUDIO 3	RCA x2	CONTROL............ D-sub 9pin x1
						USB		USB(B) x1

Optional			Lamp	456-8755E
Optional			Air filter	NJ22222
parts			Air filter	NJ22222
parts			Others	• Please consult your dealer.
			Others	• Please consult your dealer.

61

Image 63

Dukane 401-8755E-01 user manual Warranty and after-service, Specifications

Contents

Model 8755E Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Projector features PreparationsFastening the lens cover Projector Part names Video ports  Power switch AC inlet  RGB OUT port  Control buttons Remote control Setting up Min Max Down Arrangement Elevator feet Elevator button Adjusting the projectors elevator Using the Security Bar How to attachSecurity Bar Anti-theft chain or wire sold separately About Plug-and-Play capability Connecting your devices RS-232C USB Connecting to a monitor outputConnecting to a speaker with amplifier output Examples of connection with a computer Examples of connection with a VCR/DVD player CB/PBCR/PR AC inlet Connector Power cord Connecting power supply Putting batteries Remote control Changing the signal setting for the projectors remote sensor Using the remote control Off. Attach the lens cover Power on/offTurning on the power Turning off the power Temporarily muting the sound Adjusting the volumeSelecting an input signal Operating Selecting an aspect ratio Searching an input signalAdjusting the zoom and focus Selecting an input signal  For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signal Correcting the keystone distortions Using the magnify feature Temporarily blanking the screen Freezing the screen Move pointer Available function Remote control operationOperating the computer screen USB mouse and keyboard control Easy Menu Multifunctional settingsUsing the menu function Menu button Enter button Cursor buttons Reset button Easy Menu Easy Menu Adjust the level using the buttons Picture MenuGamma Color Temp Picture Menu MY Memory Position PhaseImage Menu Over Scan Image Menu For a video signal or s-video signalAuto Adjust For a component video signal Color Space Input MenuProgressive Video NR Frame Lock Input MenuComponent Video Format Custom Resolution Setup Menu Audio Setup MenuUsing the buttons / switches the mode for mirror status Volume Screen Menu Menu PositionBlank Screen Menu Start UPMyScreen Lock Message Option Menu Auto SearchAuto on MY Button Option MenuAuto OFF Lamp Time Filter Message ServiceFAN Speed Ghost Information Factory ResetRemote Freq Use the / button to change the Projectors remote sensor Security Using Security FeaturesInputting the Password Changing the Password Setting the Password Using the MyScreen Password FunctionDescription If you have forgotten your Password Turning on the MyScreen Password Function Using the PIN Lock Function Turning the Password offRegistering the PIN Code If you have forgotten your PIN Code Turning Off the PIN Lock Function Using the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Lamp Maintenance Lamp cover Screw Screws Handle Case of replacement by yourselfLamp Type number = 456-8755E Air filter Type number = NJ22222Handle Filter cover Air filter’s knob Air filterPage Related messages TroubleshootingThere is no input signal Internal temperature is rising Regarding the indicator lamps Regarding the indicator lamps Signal source does not correctly work Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connected Color Space setting is not suitable Volume is adjusted to an extremely low levelAudio setting is not correct Color settings are not correctly adjusted Lamp is approaching the end of its product Lifetime Not properly adjustedEither the focus and/or horizontal phase settings are Whisper function is working Specifications Warranty and after-service Specifications Technical Example of computer signal Initial set signals 75Ω terminated positive Connection to the ports ±0.1Vp-p, 75Ω terminator Component Video D Y, E CB/PB, F CR/PR 200mVrmsmax kΩ output impedance 200mVrmsmax kΩ termination Protocol Connecting the cableCommunications setting Command data Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset Command RS-3C Communication CRC Be EF EA F5 Be EF CE D6 CB D6 Pуcckий Be EF 08 D3 RGB1 Page Page Audio Visual Products