Dukane 401-8755E-01 Power switch , AC inlet , RGB OUT port , Video ports , Audio OUT port

		Part names
		Power switch (17)
		AC inlet (14)
Ports (See below.)		Elevator button (9)
		Elevator foot (9)
	Rear-Left side	Vent (7)

			AUDIO IN1 port (12)
			(In the default setting, the AUDIO IN1 port is the audio
AUDIO IN3 L/R port (13)			port for the RGB IN1 port, however, it is possible to
			change the settings. 36)
(In the default setting, the
AUDIO IN3 L/R port is the audio				RGB IN1 port (12)
port for the VIDEO, S-VIDEO
and COMPONENT VIDEO					Restart switch (*) (58)
ports, however it is possible to
change the settings. 36)					RGB IN2 port (12)
COMPONENT						RGB OUT port (12)
	Y R
VIDEO ports (13)
		AUDIO IN3					AUDIO OUT port
Y
				RGB IN1	RGB IN2	RGB OUT AUDIO OUT	(12)
CB/PB
	CB/PB	L		AUDIO IN1
CR/PR			AUDIO IN2
	CR/PR
VIDEO port (13)				K	CONTROL	USB
	VIDEO
						Ports
	S-VIDEO
S-VIDEO port (13)						USB port (12)
AUDIO IN2 port (12)
(In the default setting, the AUDIO					CONTROL port (12)
IN2 port is the audio port for
the RGB IN2 port, however, it is				Kensington lock slot
possible to change the settings.
36)

NOTE (*) About Restart switch: This projector is controlled by an internal microprocessor. Under certain exceptional circumstances, the projector may not operate correctly and the microprocessor will need to be reset. In such a case, please push the Restart switch by using a cocktail stick or similar, and before turning on again, make the projector cool down at least 10 minutes without operating. Only push the Restart switch in these exceptional instances.