Dukane 8104HW Replacing the internal clock battery, HITACHI MAXELL, part number CR2032 or CR2032H

Models: 8104HW

1 24
Download 24 pages 24.93 Kb
Page 20
Image 20
Replacing the internal clock battery
After making sure that the projector has cooled adequately, slowly turn over the projector, so that the bottom is facing.

Replacing the internal clock battery

This projector has internal clock that uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery:

HITACHI MAXELL, part number CR2032 or CR2032H.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.

Battery Cover

2.

3. Turn the battery cover fully in the direction indicated “OPEN” using a coin or the like, and pick the cover up to remove it.

4. Pry up the battery using a flathead screwdriver or the like to take it out. While prying it up, put a finger lightly on the battery since it may pop out of the holder.

5. Replace the battery with a new HITACHI MAXELL, Part No. CR2032 or CR2032H.

CLOSE

OPEN

90°

LOSEC

OPEN

 

Slide the battery in under the plastic claw, and push it into the holder until it clicks.

6. Replace the battery cover in place, then turn it in the direction indicated “CLOSE” using such as coins, to fix.

LOSEC

OPEN

 

90°

CLOSE OPEN

 

NOTE • The internal clock will be initialized by removing the battery. For setting the clock, see “Network Guide”. (20, 22)

HITACHI MAXELL, part number CR2032 or CR2032H.WARNING ►Be careful of handling a battery, as a battery can cause explosion, cracking or leakage, which could result in a fire, an injury, and environment pollution.

Use only the specified and perfect battery. Do not use a battery with damage, such as a scratch, a dent, rust or leakage.

When replacing the battery, replace it with a new battery.

When a battery leaked, wipe the leakage out well with a waste cloth. If the leakage adhered to your body, immediately rinse it well with water. When a battery leaked in the battery holder, replace the batteries after wiping the leakage out.

Make sure the plus and minus terminals are correctly aligned when loading a battery.

Do not work on a battery; for example recharging or soldering.

Keep a battery in a dark, cool and dry place. Never expose a battery to a fire or water.

Keep a battery away from children and pets. Be careful for them not to swallow a battery. If swallowed consult a physician immediately for emergency treatment.

Obey the local laws on disposing a battery.

18

Page 20
Image 20
Dukane 8104HW user manual Replacing the internal clock battery, HITACHI MAXELL, part number CR2032 or CR2032H