Preparing for the remote control
Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.
| Holding the hook part of the battery | 1 | 2 |
|
1. cover, remove it. |
|
| 3 | |
2. | Align and insert the two AA batteries |
|
|
|
(HITACHI MAXELL, Part No.LR6 or R6P) |
|
|
| |
according to their plus and minus terminals as indicated in the remote control.
3. Replaceplace. the battery cover in the direction of the arrow and snap it back into
NOTE
•Try changing the batteries when the remote control malfunctions.
•This remote control works with the remote sensors on the projector using infrared light (Class 1 LED). The active sensor senses the remote control signal assigned within 60 degrees to right and left, and within 3 meters.
For details, see the Operating Guide in the CD.
•Prevent the remote sensors from being hit by a strong ray. It may cause malfunction of the projector and remote control.
Remote sensor
30° 30°
3m (approx.)
WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.
•Make sure the plus and minus terminals are correctly aligned when loading a battery.
•Keep a battery away from children and pets.
•Do not recharge, short circuit, solder or disassemble a battery.
•Do not place a battery in a fire or water. Keep batteries in a dark, cool and dry place.
•If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.
•Obey the local laws on disposing the battery.
10
