Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another component. Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM/AM, TV SOUND*), while viewing the picture from a video component such
Selecting the Front Speakers
On the front panel ONLY: | SPEAKERS |
|
| 1 | 2 |
When you have connected two pairs of the front speakers, you can select which to use. Pressing
English
as the VCR or DVD player, etc.
On the front panel:
SPEAKERS 1 or SPEAKERS 2 activates the respective set of speakers.
_ ON Ñ OFF
TV SOUND/DBS
SOURCE NAME
CD | TAPE/MD | PHONO | FM/AM |
SOURCE NAME
From the remote control:
| TVSOUND/DBS |
CD | PHONO |
TAPE/MD | FM/AM |
•To use the speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position.
•To use the speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position.
•To use both sets of the speakers, press SPEAKERS 1 and SPEAKERS 2 to set them in the _ON position.
•To use neither set of the speakers, press SPEAKERS 1 and SPEAKERS 2 to set them in the ÑOFF position.
Note:
When only one set of the speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do not activate both pairs of the speakers. If you do, no sound comes out of the front speakers.
Notes:
• Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.
*Except when your TV is connected through the AV COMPU LINK remote control system (see page 27).
Adjusting the Volume
Listening only with headphones
1.Connect a pair of headphones to the PHONES jack on the front panel.
2.Press SPEAKERS 1 and SPEAKERS 2 to set them in the Ñ OFF position.
CAUTION:
On the front panel:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.
•When you turn MASTER VOLUME slowly, the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +. To decrease the volume, press VOLUME
CAUTION:
MASTER VOLUME
–
+
VOLUME
Be sure to turn down the volume before connecting or putting on the headphones, as high volume can damage both the headphones and your hearing.
Note:
You cannot shut off the sound through the other speakers using the SPEAKERS 1 and 2 buttons.
Muting the Sound
From the remote control ONLY:
Press MUTING to mute the sound through all MUTING speakers and headphones connected.
“MUTING” appears on the display and the volume turns off (the volume level indicator goes
Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
Note:
The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).
off).
To restore the sound, press MUTING again so that “OFF” appears on the display.
•Turning MASTER VOLUME on the front panel or pressing VOLUME +/– on the remote control also restores the sound.
9
