Sherwood VR-654BD manual PLAYInG a DIsc, To start playback from the menu, Before starting playback

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 28

■Before starting playback

•First set this unit as desired for optimum performance, doing the system setting procedures. (For details, refer to "OSD Menu Settings" on page 40.)

•For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English.

•Usable discs and files for each operation/function are referred to by the icons :

ENGLISH

means AVI and WMV files.

PLAYInG A DIsc

■Preparations

•Turn on the TV and select the video input source connected to this unit.

1.Select BD/DVD as input source.

2. Open the disc tray to load a disc with the printed side up.

•8 cm (3 inch) discs can be loaded on the inside circle of the tray, too.

•Depending on the disc types, it may take times to read the loaded disc.

•Then the main menu will be displayed on the TV screen.

Example :

JPEG file

Video file

3. Press the CURSOR UP/DOWN buttons to select the disc, then press the OK button. (When the Optical Disc AutoPlay is se to Off.)

•Then playback will start.

•For some discs, the menu may be displayed first.

To start playback from the menu

•To select the preferred item, press the CURSOR buttons and press the OK button or press the NUMERIC buttons.

System Settings

Loaded disc

Music file

•When the Optical Disc AutoPlay is set to On (default setting), playback will automatically start. (For details, refer to “Optical Disc AutoPlay” on page 41.)

Should this happen, ignore the step 3.

■In case of use of the NUmERIC buttons on the remote control

•When selecting “3” :

•When selecting “10” :

•When selecting “21” :

•Playback of the selected item starts.

•When the selected item contains the subitems, repeat the above step until the preferred item is selected.

•Depending on the disc, the contents of the menu and the way to operate differ.

28