ENGLISH
3. CONNECTING TV
• There are two types of video jacks (COMPONENT, (composite) VIDEO) for analog video connections and the HDMI connector for digital video and audio connections. Connect them to the corresponding video jacks according to their capability.
• For your reference, the excellence in picture quality is as follows : "HDMI” > "COMPONENT" > "(composite) VIDEO" .
• When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB" to "CB"(or
• To hear the sound that the BD player reproduces from the speakers of your TV, connect the AUDIO OUT jacks to the AUDIO IN jacks of the TV.
■Notes :
•You don’t need to make all kinds of video connections between this unit and your TV.
• Do not connect the unit to the TV through a VCR. Otherwise the picture may be disturbed due to the copy protection function.
•If the resolutions of the video signals which are output from the COMPONENT VIDEO OUTs and the HDMI OUT and your TV are not matched, the picture is not
clear, natural or displayed. To prevent it, you should set the resolution to one which the TV can handle. (For details, refer to “Video output resolution” below and “SETTING THE DISPLAY” on page 42.)
•To output the digital audio signals from the HDMI OUT to hear the sound that the BD player reproduces from the speakers of your TV, you should set the HDMI Output to On (Auto). (For details, refer to “SETTING THE AUDIO” on page 43.)
• For stable signal transfer, we recommend using HDMI cords that are a maximum of 5 meters in length.
• Among the components that support HDMI, some components can control other components via the HDMI connector. However, this unit cannot be controlled by another component via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency and
bit length) may be limited by the component that is connected.
■Copyright protection system
•This unit supports HDCP
•This unit is HDMI Ver. 1.3 compatible.
•HDMI, the HDMI logo and
■Video output resolution
•The video output resolution differs depending on the Resolution setting.
(For details, refer to “SETTING THE DISPLAY” on page 42.)
Resolution setting |
| Video OUTs |
|
|
|
| |
| (Composite) VIDEO OUT | COMPONENT OUTs | HDMI OUT |
|
|
|
|
HDMI Auto | 480i(NTSC)(or 576i(PAL)) | 1080i*1,*2 | highest resolution |
1080p | 480i(NTSC)(or 576i(PAL)) | 1080i*1,*2 | 1080p |
1080i | 480i(NTSC)(or 576i(PAL)) | 1080i*1,*2 | 1080i |
720p | 480i(NTSC)(or 576i(PAL)) | 720p*1,*2 | 720p |
480p | 480i(NTSC)(or 576i(PAL)) | 480p(NTSC)(or 576p(PAL)) | 480p(NTSC)(or 576p(PAL)) |
|
|
|
|
480i | 480i(NTSC)(or 576i(PAL)) | 480i(NTSC)(or 576i(PAL)) | 480i(NTSC)(or 576i(PAL)) |
|
|
|
|
*1 : • When the COMPONENT OUTs and the HDMI OUT are connected to your TV, the video signals of 480i(NTSC)(or 576i(PAL)) will be output.
*2 : • When the HDMI OUT is not connected to your TV and the copy protected DVD Videos are played, the video signals of 480p(or 576p) will be output.
■Notes :
•If the resolution of video signal to be output from COMPONENT OUTs or HDMI OUT does not match that of your TV, the picture is not clear, natural or displayed.
Should this happen, first make (composite) video connection between this unit and TV, and select the (composite) VIDEO as an input source on the TV to display the setting menu, then set the Resolution correctly. (For details on the resolution acceptible for your TV, refer to its operating instructions.)
•When the HDMI OUT connector is connected to your TV, the TV reports to this unit what resolutions it supports. Therefore, if you set the Resolution to HDMI Auto, this unit outputs the video signals of the highest resolution acceptable for your TV.
In this case, you cannot select the resolution inacceptable for your TV.
6
