Sherwood VR-654BD manual Auto tuning, Manual tuning, Auto presetting, Select the desired FM mode

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 47

Operation of Tuner

LISTENING TO RADIO BROADCASTS

Auto tuning

1. Select the desired FM mode.

•Each time this button is pressed, the FM mode changes as follows :

→ FM ST →	FM MONO
(“ST” lights up)	(“ST” goes off)

•When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.

2. Press the TUNING buttons for more than 0.5 second.

•The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and “TUNED”.

•If the station found is not the desired one, simply repeat this operation.

•Weak stations are skipped during auto tuning.

manual tuning

•Manual tuning is useful when you already know the frequency of the desired station.

•After selecting the desired band, press the TUNING buttons repeatedly until the right frequency has been reached.

Auto presetting

•Auto presetting function automatically searches for FM stations and store them in the memory.

•While listening to FM radio broadcasts, press and hold down the OK button for more than 2 seconds.

•Then “AUTO MEM” flickers and this receiver starts auto presetting.

•To stop auto presetting, press this button again.

•Up to 30 FM stations can be stored.

■Notes:

•FM stations of weak strength cannot be memorized.

•To memorize weak stations, preform “Manual presetting” procedure with using “Manual tuning” operation.

ENGLISH

47