Sherwood VR-654BD manual Setting the speaker setup

VR-654(G)_ENG_100129_VR-654(G) 2010-01-29 오전 10:45 페이지 20

ENGLISH

Setting the speaker setup

•After you have installed this receiver and connected all the components, you should adjust the speaker settings for the optimum sound acoustic according to your environment and speaker layout.

•Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the speaker settings, too.

SPK CFG	F LARGE / SMALL
	C LARGE / SMALL / NO
	S LARGE / SMALL / NO
	SB	LX2 / LX1 / SX2 / SX1 / NO
	SW	YES / PLUS / NO

X OVER	X OVER	50 / 80 / 100 / 150 / 200
CH LEVEL	T TONE	M / A	L 0 dB / -15 ~ +15
			C 0 dB / -15 ~ +15
			R 0 dB / -15 ~ +15
			SR	0 dB / -15 ~ +15
			SBR	0 dB / -15 ~ +15
			SBL	0 dB / -15 ~ +15
			SL	0 dB / -15 ~ +15
			SW	0 dB / -15 ~ +15
DISTANCE	L 3.0 M / 0.1 ~ 9.0

C3.0 M / 0.1 ~ 9.0 R 3.0 M / 0.1 ~ 9.0 SR 3.0 M / 0.1 ~ 9.0 SBR 3.0 M / 0.1 ~ 9.0 SBL 3.0 M / 0.1 ~ 9.0 SL 3.0 M / 0.1 ~ 9.0 SW 3.0 M / 0.1 ~ 9.0

•SPK CFG (SPEAKER CONFIGURATION) : To adjust the speakers depending on whether they are connected or not.

•X OVER (CROSSOVER FREQUENCY) : To select the desired crossover frequency.

•CH (CHANNEL) LEVEL : To adjust each channel level with the test tone.

•DISTANCE (SPEAKER DISTANCE) : To select the distance between the listening position and each speaker to set the delay

time automatically for optimum surround playback.

20