JVC RX-6100VBK manual English, Press and hold VCR POWER 2.Press VCR

English

To change the transmittable signals for	To change the transmittable signals for
operating another manufacturer’s VCR	operating a CATV converter or satellite tuner

1.Press and hold VCR POWER.

2.Press VCR.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a PANASONIC product, press 0, then 7. For a MITSUBISHI product, press 1, then 3.

4. Release VCR POWER.

Following button can be used for operating the VCR:

VCR POWER: Turns on and off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

VCR CH +/–:	Changes the TV channels on the VCR.
3:	Starts playback.
1:	Rewinds a video tape.
Á:	Fast winds a video tape.
7:	Stops operation.
8:	Pauses. To resume playing, press 3.
REC PAUSE:	Pauses recording temporarily.

Note:

Refer to the manual supplied with your VCR.

5. Try to operate your VCR by pressing VCR POWER.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR,

try each one until the correct one is entered.

Manufacturer	Codes	Manufacturer	Codes
Emerson	11	Philips	09
Fisher	29	RCA	05, 06
Funai	10, 14, 15, 16	Samsung	24
GoldStar	12	Sanyo	21, 22, 23
Hitachi	04	Sharp	27, 28
JVC	01, 02, 03	Shinton	30
Mitsubishi	13	Sony	18, 19, 20
NEC	25	Toshiba	26
Panasonic	07, 17	Zenith	08

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

1.Press and hold CATV/SAT POWER.

2.Press CATV CONTROL.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a JVC product, press 1, then 4.

For a SONY product, press 2, then 0.

4. Release CATV/SAT POWER.

Following button can be used for operating the CATV converter or the satellite tuner:

CATV/SAT POWER: Turns on and off the CATV converter or satellite tuner.

After pressing CATV CONTROL, you can perform the following operations on the equipment:

CATV CH +/–:	Changes the channels.
1 – 9, 0, 100+ (+10):	Selects the channel.
	100+ (+10) button will function as the
	ENTER button if your equipment
	requires pressing ENTER after
	selecting a channel number.
RETURN:	Alternates between previously selected
	channel and the current channel.

Note:

Refer to the manual supplied with your CATV converter or satellite

tuner.

5. Try to operate your CATV converter or satellite tuner by pressing CATV/SAT POWER.

When your CATV converter or satellite tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or satellite tuner, try each one until the correct one is entered.

Manufacturer	Codes	Manufacturer	Codes
Hamlin	15, 16, 17, 18	RCA	19
Jerrold	01, 02, 03, 04,	Scientific Atranta	09, 10
	05, 06, 07, 08
		Sony	20
Pioneer	13, 14	Zenith	11, 12

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

32