Important Information

Fire and Shock Precautions

1.Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10 cm) of space between your projector and a wall.

2.Prevent foreign objects such as paper clips and bits of paper from falling into your projector.

Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

3.Do not place any liquids on top of your projector.

4.Do not look into the lens while the projector is on. Serious damage to your eyes could result.

5.Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.

6.Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

7.The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector.

8.Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

9.If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet.

10.Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

11.Do not handle the power plug with wet hands.

12.When using a LAN cable:

For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

CAUTION

•Do not try to touch the ventilation outlet on the front side as it can become heated while the projector is turned on.

•Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

•Before putting the projector in the soft case, be sure to retract the feet. Failure to do so may cause the damage to the projector.

•Do not send the projector in the soft case by parcel delivery service or cargo shipment. The projector inside the soft case could be damaged.

•Select [High] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [Setup] → [Options] → [Fan Mode] → [High].)

•Do not unplug the power cable from the wall outlet under any one of the following circumstances. Doing so can cause damage to the projector:

*While the projector's lamp lights.

*While the cooling fans are running. (The cooling fans continue to work for 90 seconds after the projector is turned off).

*While the PC CARD Access Indicator lights. Doing so can damage your PC memory card.

iii