Dukane 8761A NOTE:, [Poor picture], Increase volume, Decrease volume, [Normal picture], Adjusting the Image Using Auto Adjust, Optimizing an RGB image automatically

3. Projecting an Image (Basic Operation)

￿Optimizing an RGB Image Automatically

Adjusting the Image Using Auto AdjustOptimizing an RGB image automatically.Press the Auto Adjust button to optimize an RGB image automatically.[Poor picture]

[Normal picture]

	MENU
	SELECT
E
N	XIT
T
ER	E

PC CARD

				R-CLICK
			VIDEO	COMPUTER	LAN
				1
			S-VIDEO		VIEWER
				2
SOURCE	AUTO ADJUST		PIC-MUTE	AUTO ADJ.	SLIDE
		LAMP	VOLUME	HELP
		STATUS
3D REFORM	ON/STAND BY	POWER		ASPECT	PICTURE
			FREEZE		3D REFORM

Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer- ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk.

This adjustment may be necessary when you connect your computer for the first time.

NOTE:

•Some signals may not be displayed correctly or take time.•The Auto Adjust function does not work for component or video signals.

•If the Auto Adjust operation cannot optimize the RGB signal, try to adjust Clock and Phase manually. See page 86.

￿Turning Up or Down Volume

Sound level from the speaker and the AUDIO OUT jack (Stereo mini) on the projector can be adjusted.

NOTE: When no menus appear, the SELECT ￿￿ buttons on the projector cabinet work as a volume control.

	R-CLICK
VIDEO	COMPUTER	LAN
	1
S-VIDEO		VIEWER
	2
PIC-MUTE	AUTO ADJ.	SLIDE
Increase volume	HELP
VOLUME
	ASPECT	PICTURE
FREEZE		3D REFORM

Decrease volume

35