3. Projecting an Image (Basic Operation)

￿Correcting Keystone Distortion

Auto Keystone Correction

The Auto Keystone correction feature will correct vertical distortion of a projected image on the screen. No special operation required. Just put the projector on a flat surface.

Manual Keystone CorrectionYou can also correct keystone distortion manually.To do so:

1.Extend the Adjustable Tilt Foot to adjust the height of a projected image. See page 31.

The Keystone screen will be displayed on the screen.

•If the Keystone screen disappears, press the 3D REFORM button once to display the Keystone screen again.

2.Align the left (or right) side of the screen with the left (or right) side of the projected image.

•Use the shorter side of the projected image as the base.•In the right example, use the left side as the base.

NOTE: When "Manual" is selected in "Keystone" from the menu, project an image adjusting projector position so that the screen is smaller than the area of the projected image. See page 90 for selecting "Manual" in "Keystone".

Projected area

Screen frame

Align left side

3.Use the SELECT ￿ or ￿ button to adjust “Horizontal”. Perform the keystone correction.

4.If the right and left sides of the projected image are not parallel to each other, use the SELECT ￿ button to select “Vertical” and use the SELECT ￿￿ button.

Fine adjust so that both sides are parallel to each other.

33