1. Introduction
Battery Installation
1Push the catch to the right and remove the battery holder.
2Remove the old Lithium coin cell and install new one (CR2032). Ensure that the side with the mark “+” is up.
CR2025
3Push the battery holder back into the remote control until you feel a click.
CR2025
Remote Control Precautions
•Handle the remote control carefully.
•If the remote control gets wet, wipe it dry immediately.
•Avoid excessive heat and humidity.
•If you will not be using the remote control for a long time, remove the battery.
•Do not place the battery upside down.
•Keep the coin cell battery out of reach of children so as not to allow them to swallow the cell battery.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to your local regulations.
Operating Range for Wireless Remote Control
Remote sensor on projector cabinet | Remote control |
7m/22 feet |
30° |
30° |
30° |
30° |
7m/22 feet
•The infrared signal operates by
•The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor.
Weak battery will also prevent the remote control from properly operating the projector.
12
