Dukane 8755E-RJ, 8776-RJ user manual SCREEN Menu continued, The current name will be displayed

5174%'0#/'

4)$

4)$&'5-6122% %1/210'06&8& 58+&'1%#/'4#

8+&'1864

SOURCE NAME MENU *Right side of the menu is blank until a name is specified

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Using the buttons ▲/▼ turns on/off the message function.

TURN ON ó TURN OFF

	When the TURN ON is selected, the following message function works.
	“AUTO IN PROGRESS” while automatically adjusting
	”NO INPUT IS DETECTED”
	”SYNC IS OUT OF RANGE”
	"Searching….” while searching for the input
MESSAGE	”Detecting….” while an input signal is detected
	The indication of the input signal displayed by changing
	The indication of the aspect ratio displayed by changing
	The indication of the My Memory displayed by changing
	The indication of the Picture Mode displayed by changing
	The indication of "FREEZE" and "II" while freezing the screen by
	pressing the FREEZE button.

•When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction (22).

Each input port for this projector can have a name applied to it.

(1) Use the ▲/▼ buttons on the SCREEN

menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.

(2) Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed.

(3) The current name will be displayed		0#/'4)$	5'.'%6
		4)$	
on the first line. Use the ◄/►/▲/▼ and
		#$%&'()*+,-./0
ENTER or INPUT buttons to select and		123456789:;<		
enter characters. The RESET button can		CDEFGHIJKLMNOP
		QRSTUVWXYZ[\
be used to erase 1 character at a time. The		A!
		
SOURCE NAME name can be a maximum of 16 characters.		'5%37+6	'06'40':6
(4) To change an already inserted character, 0#/'4)$			5'.'%6
press the ▲ button while the cursor is on the		4)$	
[A-N] row to move the cursor to the name		#$%&'()*+,-./0		
displayed on the first line and use the ◄/►		123456789:;<
		CDEFGHIJKLMNOP
buttons to select character to be changed.		
Once a character in the name is selected		QRSTUVWXYZ[\
		A!
use the ▼ button to move the cursor back		'5%37+6
down to the character entry area to select		0#/'4)$	5'.'%6
and enter characters as described above.		4)$	
(5) Select	and press the ENTER or	#$%&'()*+,-./0		
		123456789:;<
INPUT buttons when finished entering text.		QRSTUVWXYZ[\
To revert to the previous name without		CDEFGHIJKLMNOP
		
saving changes press the ESC or ◄ button		'5%37+6	'06'40':6
		A!
and the INPUT button simultaneously.
			39