IMAGE Menu
IMAGE
Menu
From the IMAGE menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.
Item | Description | |
|
| |
| Using the ▲/▼ buttons switches the mode for aspect ratio. | |
| For a PC signal | |
| NORMAL ó 4:3 ó 16:9 ó 16:10 ó REAL | |
| For an HDMI signal | |
| NORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9 ó REAL | |
ASPECT | For a Video signal, | |
| 4:3 ó 16:9 ó 16:10 ó 14:9 ó REAL | |
| For no signal | |
| 16:10 (fixed) | |
| • This item can be selected only for a proper signal. | |
| • The NORMAL mode keeps the original aspect ratio setting. | |
| • Performing the automatic adjustment initializes the aspect ratio setting. | |
| Using the ▲/▼ buttons adjusts the | |
OVER SCAN | Large (It reduces picture) ó Small (It magnifies picture) | |
• This item can be selected only for a video, | ||
| • When this adjustment is too large, certain degradation may appear | |
| at the frame area of the picture. In such a case, please adjust small. | |
| Using the ▲/▼ buttons adjusts the vertical position. | |
| Up ó Down | |
| • | |
| screen. If this occurs please reset the vertical position to the default setting. | |
V POSITION | Pressing the RESET button when the V POSITION is selected will reset the | |
V POSITION to the default setting. | ||
| ||
| • When this function is performed on a video signal, | |
| component video signal, the range of this adjustment depends on the | |
| OVER SCAN (above) setting. It is not possible to adjust when the OVER | |
| SCAN is set to 10. | |
| Using the ▲/▼ buttons adjusts the horizontal position. | |
| Left ó Right | |
| • | |
| screen. If this occurs please reset the horizontal position to the default | |
H POSITION | setting. Pressing the RESET button when the H POSITION is selected will | |
reset the H POSITION to the default setting. | ||
| ||
| • When this function is performed on a video signal, | |
| component video signal, the range of this adjustment depends on the | |
| OVER SCAN (above) setting. It is not possible to adjust when the OVER | |
| SCAN is set to 10. |
26(continued on next page)
