Dukane 8783 INPUT Menu continued, Description, Video Format, Hdmi, Frame Lock, Computer In

INPUT Menu

INPUT Menu (continued)

Item

Description

Set the video format for the s-video port and video port.

(1)Use the ◄/► buttons to select the input port.

(2)Using the ▲/▼ buttons switches the mode for video format.

VIDEO FORMAT	AUTO ó NTSC ó PAL ó SECAM
	N-PAL ó M-PAL ó NTSC4.43

•This item is performed only for a video signal from the VIDEO port or the S-VIDEO port.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.

Using the ▲/▼ cursor buttons changes the HDMI signal mode.

AUTO ó NORMAL ó ENHANCED

HDMI			Feature
		AUTO	Selecting the optimum mode automatically.
		NORMAL	Suitable for DVD signals (16-235)
		ENHANCED	Suitable for VGA signals (0-255)
	• If the contrast of the screen image is too strong or too weak, try
	finding a more suitable mode.
	Set the frame lock function on/off for each port.
	(1) Use the ▲/▼ buttons to select one of
	following ports.
		COMPUTER (IN)1 ó COMPUTER (IN)2 ó HDMI
		QUIT
FRAME LOCK	(2) Use the ◄/► buttons to turns the frame
	lock function on/off .
		TURN ON ó TURN OFF
	• This item can be performed only on a signal
	with a vertical frequency of 49 to 51 Hz, 59 to 61 Hz.
	• When the TURN ON is selected, a moving pictures are displayed more smoothly.
	• This function may cause a certain degradation of the picture. In
	such a case, please select the TURN OFF.
	Set the computer input signal type for the ports of COMPUTER IN1 and COMPUTER IN2.
	(1) Use the ◄/► buttons to select a COMPUTER port to be set.
		COMPUTER (IN)1 ó COMPUTER (IN)2
	(2) Use the ▲/▼ buttons to select the computer input signal type.
COMPUTER IN		AUTO ó SYNC ON G OFF
	Sync on Green signal can be supported, if AUTO is selected.
	• When the AUTO is selected, the picture may be distorted with certain
	input signals. In such a case, remove the signal connector first and
	select SYNC ON G OFF on the menu, and then reconnect the signal.
	• Component signal can be supported through COMPUTER IN1
	port, if AUTO is selected for the COMPUTER IN1 port.

(continued on next page) 29