INPUT menu
Item | Description |
The computer input signal type for COMPUTER IN1 and IN2 ports can be set.
(1)Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
(2)Use the ◄/► buttons to select the computer input signal type.
COMPUTER IN | AUTO ó SYNC ON G OFF | |
• Selecting the AUTO mode allows | ||
| ||
| you to input a sync on G signal or component video signal from the | |
| port (11, 13). |
•In the AUTO mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal.
| Set the frame lock function on/off for each port. | |
| (1) Use the ▲/▼ buttons to select | |
| the input ports. | |
| (2) Use the ◄/► buttons to turn the | |
FRAME LOCK | frame lock function on/off . | |
ON ó OFF | ||
| ||
| • This item can be performed only on a signal with a vertical | |
| frequency of 49 to 51Hz, 59 to 61 Hz. | |
| • When ON is selected, moving pictures are displayed more | |
| smoothly. |
(continued on next page)
41