![Using ▲/▼ buttons switches the standby mode setting between](/images/new-backgrounds/119438/11943889x1.webp)
SETUP menu
Item | Description |
|
|
| Using ▲/▼ buttons switches the standby mode setting between |
| NORMAL and SAVING. |
| NORMAL ó SAVING |
| When SAVING is selected, the power consumption in the standby |
| mode is lowered with some functional restriction as below: |
•When SAVING is selected, the
STANDBY MODE while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all of the
•When SAVING is selected, STANDBY setting of AUDIO SOURCE (46) is invalid, and no signal is output from AUDIO OUT port in the standby mode.
•When SAVING is selected, STANDBY setting of MONITOR OUT is invalid, and no signal is output from MONITOR OUT port in the standby mode.
| While the image signal from the input port chosen in step (1) is |
| projected, the image signal from the input port selected in step (2) is |
| output to MONITOR OUT port. |
| (1) Choose a picture input port using ▲/▼ buttons. |
| Choose STANDBY to select the picture |
| output in the standby mode. |
| (2) Select one of the COMPUTER IN ports |
| using ◄/► buttons. |
| Select OFF to disable the MONITOR OUT |
MONITOR OUT | port for the input port or standby mode |
| chosen in the step (1). |
| • You cannot select COMPUTER IN2 for COMPUTER IN1, and vice |
| versa. |
| • If you have changed the setting of STANDBY, it applies only to |
| the current standby mode, NORMAL or SAVING, selected under |
| STANDBY MODE, without changing the setting of the other mode. |
| The factory settings are as follows: |
| - COMPUTER IN1 for the NORMAL mode of STANDBY MODE |
| - OFF for the SAVING mode of STANDBY MODE |
45