NETWORK menu
Item
Description
WIRELESS
SETUP
(continued)
| Use the ▲/▼ buttons to turn DHCP on/off. |
| ON OFF |
| Select OFF when the network does not have DHCP |
DHCP | enabled. To save the setting, press the ► button. |
(Dynamic Host | • When the “DHCP” setting changes to “ON”, it |
Configuration | takes a little time to obtain IP address from DHCP |
Protocol) | server. |
| • Auto IP function will be assigned an IP address if |
| the projector could not obtain an IP address from |
| server even if DHCP is “ON” |
| Use the ▲/▼/◄/► buttons to enter the IP |
| ADDRESS. |
| This function can only be used when DHCP is set |
IP ADDRESS | to OFF. |
• The IP ADDRESS is the number that identifies | |
| this projector on the network. You cannot have two |
| devices with the same IP ADDRESS on the same |
| network. |
| • The IP ADDRESS “0.0.0.0” is prohibited. |
| Use the ▲/▼/◄/► buttons to enter the same |
SUBNET | SUBNET MASK used by your computer. |
This function can only be used when DHCP is set | |
MASK | to OFF. |
| |
| • The SUBNET MASK “0.0.0.0” is prohibited. |
| Use the ▲/▼/◄/► buttons to enter the DEFAULT |
DEFAULT | GATEWAY (a node on a computer network that |
serves as an access point to another network) | |
GATEWAY | address. |
| This function can only be used when DHCP is set |
| to OFF. |
| Use the ▲/▼/◄/► buttons to input the DNS |
DNS SERVER | server address. |
The DNS server is a system to control domain | |
| names and IP addresses on the Network. |
| Use the ▲/▼ buttons to enter the TIME |
| DIFFERENCE. |
| Set the same TIME DIFFERENCE as the one |
| set on your computer. If unsure, consult your IT |
TIME | manager. |
DIFFERENCE | Use the ► button to return to the menu after |
| setting the TIME DIFFERENCE. |
| • When this item is set, the same item in the |
| WIRED SETUP menu is overwritten with the same |
| setting (69). |
(continued on next page)
64
