Connecting to Video Devices, Video devices | Dukane 9015 manual

Connecting to Various Devices (Cont.)

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.

•Read the manual which comes with each video device thoroughly.

•Use the supplied AV connection cable. An AV connection cable with an S video terminal is not supplied.

S video cable

To Y/C (separately available)

Video devices

• VCR (Video Cassette recorder)

VIDEO

AUDIO

Y

PB/B-Y

PR/R-Y

REMOTE

AUDIO OUT

BNC-RCA conversion plug (accessory)

To VIDEO

To AUDIO (L)

AV connection

To AUDIO (R) cable (accessory)

• Laser video disc player

• Camcorder

RS-232C

To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

Memo

•When connecting a video device, use a TBC along with it, or one which has a built-in TBC.

•Use of an extension cable to connect a video device and the projector could cause video degradation.

•When a signal with much jitter is reproduced on a VCR or special- effect playback is performed, the upper part of the picture or the picture itself may be erased or distorted.

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.

•Read the manual which comes with each Hi-Vision device thoroughly.

•Use separately available BNC cables and audio cables to connect Hi-Vision devices.

To AUDIO (R)

Hi-Vision devices

• W-VHS VCR

To AUDIO (L)

Y/CVIDEO

AUDIO

L

R/B-Y

-Y

REMOTE

AUDIO OUT

Audio cable (separately available)

• Text/video camera

To VIDEO
To Y
To PB/B-Y
To PR/R-Y	• Hi-Vision video camera
	• Hi-Vision video camera
BNC cable (separately available)

RS-232C

To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

Memo

•Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected. (*DVD: Digital Video Disc)

•DTV-format signals (480i, 480p,720p,1080i) can be input. For DTV- format signals that can be handled, refer to page 56.

20

Image 20

Dukane 9015 manual Connecting to Video Devices, Connecting to Hi-Vision Devices, Video devices, Hi-Vision devices

Contents

ImagePro Safety Precautions About burning-in of the D-ILA device Safety Precautions Lamp directly by opening the cabinet while the illumination Contents Accessories Controls and Features Front Side / Top Surface / Right Side AC in power input terminal Main Power switchConnector panel Adjustable foot for horizontal angle adjustment Bottom Surface Air intake area filterOpening for replacing the light-source lamp Fixing foot Position selecting screw for ceiling mounting Control Panel Setting button When a menu is shownVideo button Computer button Connector Panel C S video input terminal Mini DIN 4 pinRS-232C terminal D-sub 9 pin Computer OUT computer output terminal D-sub 3-row 15 pin Audio input terminal stereo mini jack Projector’s speakersComputer in computer input -1 terminal D-sub 3- row 15 pin Audio audio input terminal stereo mini jack Remote Control Unit Installing Batteries Install the batteriesPrecautions for using batteries Open the back cover Installing the Projector Precautions for InstallationDo not install the projector in the following places When installing the projector, observe the followings Projection Distance and Screen Size Projection screen size diagonal lengthCenter line of the lens Projection 55.76 ft 17.0 m 294 Approx cm 443 59.04 ft 18.0 m 311 Approx cm 46962.32 ft 19.0 m 328 Approx cm 495 65.6 ft 20.0 m 345 Approx cm 521 Effective range and distance of the remote control unit Effective Range and Distance of the Remote Control UnitSetting the position selecting screw for Ceiling Mounting Connecting to Various Devices Signals that Can Be Input to the ProjectorVideo signals Computer signals Connecting to Video Devices Connecting to Hi-Vision DevicesVideo devices Hi-Vision devices Connecting to Other Devices Connecting to Devices which Control the ProjectorDesktop type To Audio OUT Connecting to Computer Devices Connection to an IBM PC or IBM-compatible computerRead the manual which comes with each device thoroughly OUT Personal computer connection cable To monitor connector SuppliedConnection to Macintosh Connecting the Power Cord Supplied To use the projectorRemove the lens cap To prevent fire and electric shock, observe the following When Turning On the Devices Connected to the Projector Turning on the Power Turn on the Main Power switchTurning off the Power Basic Operations Adjust the screen size When you press VideoWhen you press Computer Follows Adjust focus with the remote control’s Focus +/- buttons Adjust focusAdjust sound volume To turn off video image and audio sound temporarily To use the quick alignment functionProjector’s button Press once Remote control unit To display the Setting menu To use the remote control’s Preset buttonProjector button To display the Main menu Operating the Setting Menu Making Basic SettingsPress the Setting button of the projector Press the Setting button to select the desired item Operating the Main Menu Configuration of the Main Menu Computer-related input Operating the Main Menu Basic Operation of the Main Menu Changing the Color System Select Decoder with the cursor button 5 or ∞Set the color system with the cursor button 2 or To finish the main menu, press the page Back button Changing the Language Display Set the desired language with the cursor button 2 orLanguage display About language display Button Adjustment content Adjusting the Pixel ClockAdjust Tracking and Phase with the cursor buttons Select Position with the cursor button 5 or ∞ Adjusting the Screen PositionAdjust H. POS. and V. POS. with the cursor buttons Adjusting Picture Quality Select the item to adjust with the cursor button 5 or ∞When AV signals are input When computer-related signals are input Submenu items For video system inputFor computer system input Picture menu Normal TEXT1 TEXT2 Adjusting Sound Quality Adjust Treble and Bass with the cursor buttonsSelect the Sound with the cursor Button 5 or ∞ Setting and Adjusting Other Functions Options Select the item to set adjust with the cursor button 5 or ∞Following optional functions can be set adjusted Select the Options with the cursor button 5 or ∞ Set adjust the desired item with the cursor button 2 or Options menu Aspect Changing Setting the Source Select the item to set using the cursor buttons 5/∞ or 2/3Input mode Factory setting Source item shown in text is indicated in magenta color When Auto is selected When other than Auto is selectedFix it Submenu item Replacing the Light-Source Lamp Loosen the two screws with a flat-end screwdriver Handle Lamp unit Insert the new lamp unit fully inside and fasten the screwsFasten the two screws with a flat-end screwdriver Resetting the Lamp Use Time Turn on the Main Power switch to go into stand-by modeProjector’s button At the same time for six seconds or more Cleaning and Replacing the Filter Turn off the Main Power switchClean the filter Reinstall the filter Troubleshooting Maintenance Computer in Computer input SpecificationsAV in AV in input Other Outside dimensions DTV-format signalsTop Front Pin assignment Specifications for terminals TerminalRS-232C terminal Computer IN-1 PC / Computer OUT Terminal