12
MEMO Modus
Using the 5 direct channel buttons You can switch at any time from the present channel (normal channel modus) to the 5 programmable stored stations (MEMO modus) and switch back again.
Recall direct channels
∙Press one of the 5 direct channel buttons briefly. The unit will switch to the pre programmed channel. The channel number and the button number will displayed.
The manufacturer has
∙ | Channel 1 | recommended call channel on FM |
∙ | Channel 4 | recommended as call channel for AM |
∙ | Channel 9 | international calling and emergency channel |
In Germany particularly this Channel 9 (in AM) is also used by all truck drivers. This means: a large number of stations are listening in. If the worst comes to the worst (e.g. in case of accident etc.) there is a good chance that someone will be listening.
To call other stations, who you know are listening in on channel 9, you can also use this channel. Call up the desired station on channel 9. As soon as contact has been made, agree on a free channel for your conversation and then channel 9 will be free again for other calls.
An emergency channel can of course only work if as many stations as possible are listening in. Therefore listen in to this channel as often as possible.
∙Channel 19: Trucker channel in France, Spain and Italy (in AM).
∙Channel 40
Programming one of the 5 direct channel buttons
You can
∙Choose when in normal modus the desired channel and the modulation mode AM or FM (where allowed).
∙Press the M button briefly (ME for Memory Enable appears on the display)
∙Within the next 5 seconds press the desired direct channel button (1 to 5)
The desired channel is now stored on the direct channel button selected. You will see both channel number (large) and direct button number (small) in the display.
The station will remain stored as long as the power supply is not interrupted or until You make a reset procedure for country switching.
Please note that the German channels
12