6. Getting Started
6-1 Setup Mode 
In Setup Mode, you can adjust basic camera settings, including Image Size, Image Quality, White balance, and EV Compensation; General setting format and factory default setting. Setup for language, date/time and light frequency is as follows:
1.Turn the camera on by sliding the lens cover.
2.Press Mode Button 
for two seconds and use
Function keys 
to move to 
.
3.Press the
Button to get into Setup Mode, the LCD monitor will display the menu.
4.Use the down key “ ” of the Function keys 
to move between selections; Use “ ” to toggle between submenus (Image Options, Option and System Options.
5.Then use 
Button to drill down into the menu. Select items using “ ” and ” ”.
6.Last, use the 
Button to confirm your selections.
6-2 Record Mode 
Record Mode offers you a quick and easy way to take ideal pictures.
1.Turn on the camera to go directly into Record Mode. (You can also enter into Record Mode through Mode
Button 
and use the Function keys 
to
move to 
and then press 
. )
An image of what is in front of the lens will appear on the LCD monitor.
2.Press and hold the Shutter button half way down. A yellow “[ ]" will appear in the center of the LCD monitor. Press the Shutter button down fully and release it to complete the recording.
3.You can use 
to select two flash modes when using the camera: Auto, and Off.
4.Press the 
to toggle the LCD Monitor displays. There are five display modes: Standard Display, Full Display, Image Only, LCD Monitor Off, Only Operation Settings.
5.Using the Mode Button 
to set the details settings for recording images, e.g., Image Resolution, Image Quality,
when Mode Button 
is pressed. Use “ ” of
the Function keys 
to move between selections.
6.Using “ ” and ” ” of the Function keys 
to adjust the digital zoom. The adjustment ratio of the digital zoom will appear on the left hand side of
the LCD monitor, from 1.0 time to 4.0 times, with 0.5 times increase at each adjustment.
7.The green LED comes on when the Macro key on the
20
