DXG Technology DXG-228 manual Power On, Shutter Button

3-3 Power On

●Gently slide lens cover open as illustrated. A long beep sounds, and the camera turns on.

●To turn off the camera, gently slide the lens cover so the lens is hidden.

●Use the lens cover located on the front of the camera

to turn the camera on and off. After the camera is on, the red LED will blink, and then the last image recorded will appear on the LCD monitor.

※Power Saving: If no operations are performed for 60

seconds, the power is turned off to prevent battery drain. Please power on the camera again to resume shooting.

※Unless "Reset Default" has been selected before the

camera is turned off, the following features will be automatically saved in the user’s selected configuration:

1.Resolution 2. Image Quality 3. Language

4.White balance 5. EV Value 6. Frequency

7.PC MODE

3-4 Shutter Button

This camera is designed for 2-step shutter function. A "[ ]" mark appears in the center of the LCD display when the Shutter button is pressed and held half way down. The camera will beep after the Shutter button is pressed down fully; then release the Shutter button to take a picture.

9