5Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool. See Figure 6.
NOTE To ensure proper feeding of labels during printing, the label roll must fit snugly against both sides of the label spool, with no gaps.
6Insert the label spool into the slot in the printer cover with the labels extending from underneath the roll. See Figure 7.
7Align the left edge of the label with the left edge of the label feed slot and insert the label into the slot. See Figure 8.
The printer automatically feeds the label, stopping at the beginning of the first label.
If the printer does not feed the labels, make sure the first label is fully inserted and then press the
If the first label on the roll is not a full label, press the
8Carefully lower the top cover.
Figure 6
Figure 7
Align labels against left edge
Figure 8
6
