![Controls and connections](/images/new-backgrounds/24529/2452923x1.webp)
Controls and connections
|
| ➋ |
|
| POWER | GAIN | PHASE |
➊ | ON AUTO |
| 0° 180° |
|
|
| |
|
| Min | Max |
| SAT Highpass | SUB Lowpass |
➍Flat 60Hz 80Hz
|
| 50 Hz | 150 Hz |
|
| SAT/SUB Input | SAT Output |
| LEFT |
|
|
➏ |
|
|
|
| RIGHT |
|
|
|
| LFE / Slave IN | OUT |
➐ | SUB I/O |
| To Slave |
➑ | LFE | Slave |
|
|
|
| |
|
|
| ~ 50/60Hz 3.15A |
ON
➒
OFF
FUSE T3.15A L 250V
➐SUB I/O, To Slave
•LFE/Slave IN: input for LFE signal from processor/receiver. Note that the signal must be a true LFE signal or already have been filtered by the processor/receiver, as SUB Lowpass does not have an effect in combination with the LFE input.
➌• OUT: output to next subwoofer if installed.
➑LFE/Slave
➎Subwoofer operation mode LFE or Slave:
•LFE: setting if just one subwoofer is used or for first subwoofer if system consists of multiple subwoofers. Note that the SUB Lowpass control does not have an effect when the LFE Mode is selected.
•Slave: setting for second and all following subwoofers. Note that the SUB Lowpass, PHASE and GAIN controls do not have an effect when the Slave Mode is selected.
➒ON/OFF
Main power switch (to switch the subwoofer manually on and off). LED: shows operation mode:
•red = subwoofer switched on and in mute mode
•green = subwoofer is activated
➓AC IN
Main power input.
➓
Owners Manual | 9 |