Dynex DX-32E150A11 Connecting a computer, Connecting headphones, To connect a computer:, To play from the VCR, camcorder, or game:, To play video from a computer:

Making connections DX-32E150A11 9

2Connect a standard AV cable (not included) to the AV VIDEO OUT jack on the VCR, camcorder, or game.

Connecting a computer

Tip: Some computers have an HDMI connector, which can be used for a better picture and sound.

To connect a computer:

1Make sure that your TV’s power cord is unplugged and the computer is turned off.

Back of TV

Back of VCR

Composite cable

Note: Cables are often color-coded to connectors, however on this TV the jacks are shared. Connect red to red and white to white for the audio cables, then connect the video cable to the Y (green) jack on the TV and the yellow jack on the VCR.

2Connect a VGA cable to the VGA jack on the computer, then connect the other end of the cable to the PC IN VGA jack on the back of your TV.

Note: The VGA cable should be a 15-pin D-Sub (analog RGB) cable.

Back of TV

Computer

Back of TV

Audio cable (stereo mini plugs)

Camcorder or game D-Sub cable (analog RGB)

Composite cable

Note: Cables are often color-coded to connectors, however on this TV the jacks are shared. Connect red to red and white to white for the audio cables, then connect the video cable to the Y (green) jack on the TV and the yellow jack on the camcorder or game.

3Connect the other end of the cable to the Y (green) jack on the COMPONENT/AV IN panel on the back of your TV.

4Connect an audio cable to the AV AUDIO OUT jacks on the device.

5Connect the other end of the audio cable to the L and R jacks on the COMPONENT/AV IN panel on the back of your TV.

To play from the VCR, camcorder, or game:

1Turn on your TV, then press INPUT. The Source List menu opens.

2 Pressorto select AV, then press ENTER.

3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.

-OR-

Turn on the camcorder or game, and set it to the correct output mode. See the camcorder’s or game’s user guides for more information.

3Connect an audio cable to the AUDIO OUT jack on the computer, then connect the other end of the cable to the AUDIO jack on the back of your TV.

Note: The audio cable should have a stereo mini plug.

To play video from a computer:

1Turn on your TV, then press INPUT. The Source List menu opens.

2 Press or to select VGA, then press ENTER.

3Turn on the computer, then adjust the display properties, if necessary.

Connecting headphones

To connect headphones:

•Connect the headphones to the headphone jack on the side of your TV.

Side of TV

Caution: Loud noise can damage your hearing. When using headphones, use the lowest volume setting that still lets you hear the sound.

Note: The TV mutes automatically when you plug in the headphones.