Dynex DX-32E150A11 Maintenance, Specifications, Remote control, General, Cleaning, TV panel, TV system, Channels, Audio multiplex, Audio output, Dimensions, Weight

26 DX-32E150A11

Maintenance

Problem	Solution

The picture has a	• A few bright or dark spots on an LCD screen
few bright or dark	is normal. It does not affect the operation of
spots.	this TV.

Good picture, but no	• Make sure that the sound is not muted.
sound.	• Make sure that the sound mode is set to
	Stereo or Mono. For more information, see
	“Adjusting sound settings” on page 14.

Audio noise.	• Make sure that there is no interference with
	infrared equipment such as a cordless
	telephone or headphones. Move the
	infrared equipment away from the TV to
	eliminate the noise.

Problem	Solution

Remote control	• Make sure that the power cord is plugged
does not work.	in.
	• Make sure that there are no obstructions
	between the remote control and the
	remote control sensor on the front of the
	TV.
	• Make sure that the batteries are installed
	correctly. For more information, see
	“Installing remote control batteries” on
	page 6.
	• Replace the batteries. For more
	information, see “Installing remote control
	batteries” on page 6.

Trouble	• See instructions and a table of common
programming your	codes in “Programming a universal remote
existing universal	control to work with your TV” on page 7.
remote control.	• Codes are subject to change. For up to date
	codes, go to www.dynexproducts.com.
	• Replace the batteries. For more
	information, see “Installing remote control
	batteries” on page 6.
	• Refer to the User Guide that accompanied
	your universal remote control and contact
	the manufacturer if problems persist

Problem	Solution

One or more	• Make sure that the channels are not blocked.
channels do not	For more information, see “Setting parental
display.	control levels” on page 19.
	• Make sure that the channels are not hidden.
	For more information, see “Hiding channels”
	on page 15.
	• The channel may have been deleted from the
	channel list. You can tune to the channel by
	pressing the number buttons or you can add
	the channel back to the channel list. For more
	information, see “Changing channel settings”
	on page 15.

Password is lost.	• Enter 9999 to access parental controls, then
	set a new password. For more information, see
	“Setting parental control levels” on page 19.

Problem	Solution

Some settings	• If a setting is grayed, the setting is not
cannot be	available in the current video input mode.
accessed.

TV cabinet creaks.	• When the TV is in use, the temperature rises
	naturally and may cause the cabinet to
	expand or contract which can cause a
	creaking noise. This is not a malfunction.

Control buttons	• Disconnect the power cord, wait a few
on the TV do not	seconds, then reconnect the power cord and
work.	turn on the TV.

Note: If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again.

•Clean your TV with a soft, dry cloth. If surfaces are extremely dirty, use a soft cloth dampened with a weak detergent solution.

•Use an eyeglass cleaner to clean the screen. Never use alcohol, paint thinner, or benzine.

•Before using a chemically treated cloth, read the instructions that came with the cloth.

Design and specifications are subject to change without notice. Dimensions and weight are approximate.

TV type	LCD
TV panel	32-inch TFT LCD

TV system	NTSC-M, ATSC

Channels	VHF: 2 - 13
	UHF: 14 - 69
	CATV: 1 - 125
	CADTV: 1-135
	DTV: 2 - 69

Audio multiplex	BTSC system

Audio output	8.4W × 2
Power requirement	AC 120 V, 60 Hz

Power consumption	110 W

Dimensions	30.7 x 21.2 x 8.3 inches
(WxHxD with stand)	(779.8 x 538.5 x 210.8 mm)

Weight	20.7 lbs (9.4 kg)

Input terminals	Composite (AV) video/left and right audio (1)
	Component video/left and right audio (1)
	HDMI (2)
	VGA/audio (1)
	Antenna (1)

Output terminals	Headphone jack (1)
	DIgital optical audio (1)
Control terminals	Service Port (1)