Understanding the basics

DX-32E150A11 11

If you selected Antenna or Cable, your TV automatically scans for available channels in your area and stores the channel information in the channel list. This may take several minutes. While scanning, the TV displays a progress report.

– OR –

If you selected Cable/Satellite Box, the auto scan is not necessary and the screen will ask you to select the correct input source for your set top box. Press EXIT to close the menu.

Note: Channel scan can take up to 20+ minutes.

You can press EXIT at any time to stop the auto scan, but you will need to run the auto scan again to create a channel list.

12Select the corresponding video input source through the Source List.

Understanding the basics

Turning your TV on or off

To turn your TV on or off (standby mode):

1Plug the power cord into an AC power outlet.

2 Press (power). Your TV turns on.

3Press again to turn off your TV. When you turn off your TV, it goes into standby mode.

Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.

Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:

1Turn on your TV, then press the INPUT key on the remote, or the INPUT button on the TV. The Source List menu opens.

Source List

TV

AV

VGA

HDMI1

HDMI2

2Press or to highlight the video source, then press ENTER. You can also press TV to switch to TV mode.

Selecting a channel

To select a channel:

•Press CH+ or CH- to go to the next or previous channel on the memorized channel list.

•Press the number buttons to enter the analog or digital (main) channel number you want, then wait for the channel to change, or press ENTER to change the channel immediately.

•To select a digital sub-channel, press the number buttons to select the main digital channel, then press the dot (.) button to select the sub-channel. Wait for the channel to change, or press ENTER to change the channel immediately.

Note: Button presses must be within three seconds of each other.

• Press RECALL to go to the last channel viewed.

Adjusting the volume

To adjust the volume:

•Press VOL+ or VOL– to increase or decrease the volume.

•Press MUTE to temporarily turn off all sound. Press MUTE again to restore the sound.

Displaying additional information

To display additional information:

•Press INFO to show an information banner. The information banner shows current program information such as resolution.

•Digital mode information—Displays program name, time, channel number, channel label, TV rating, resolution, and current signal strength, and audio information.

•Analog mode information—Displays channel number, audio information, TV rating, resolution, channel label, and current signal strength.

•Press GUIDE to show the digital program guide, which may show a list of available programs, program times, and program summaries, depending on the information provided by the broadcaster.

On-screen menu overview

PICTURE menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PICTURE

 

AUDIO CHANNELS SETTINGS

Mode

 

Energy Savings

Brightness

 

 

 

 

 

 

 

 

 

 

 

 

 

48

 

Contrast

 

 

 

 

 

 

 

 

57

 

Color

 

 

 

 

 

70

 

Tint

 

 

 

 

 

 

 

0

 

Sharpness

 

 

 

 

 

 

 

6

 

Advanced Video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO menu

 

 

 

PICTURE

AUDIO CHANNELS SETTINGS

Sound Mode

Standard

Treble

 

 

 

 

 

 

 

 

50

 

 

 

 

 

Bass

 

 

 

 

 

40

 

 

 

Balance

 

 

 

 

 

0

 

 

 

Surround

 

 

On

MTS/SAP

STEREO

Audio Language

English

Digital Audio/SPDIF

 

PCM