4IntroductionDX-32L200NA14
Introduction
Congratulations on your purchase of a high-quality
Dynex product. Your DX-32L200NA14 represents the
state of the art in LCDTV design an d is designed for
reliable and trouble-free performance.

Attaching the stand or preparing

your TV for wall mounting

Attaching the stand

To attach the stand:
1Carefully place your TV face-down on a cushioned,
clean surface to protect the screen from damages
and scratches.
2Secure the stand to the TV with the six screws
provided.

Preparing your TV for wall mounting

To prepare your TV for wall mounting:
1Carefully place your TV face-down on a soft surface
to protect the screen from damages and scratches.
2Remove the four screws that secure the stand
column to the TV.
3Remove the stand column.
4Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
Notes
If you plan to wall-mount your TV, do not install
the stand.
Store the stand and stand screws in case you
decide to use the stand in the future.
Screw type Screw length # of screws
M5 16 mm 6
M5 (16mm)
Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
Miscellaneous” on page 40.)
Note
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
The mounting holes on the back of your TV take
type M5 screws.
15.75 in. (400 mm)
15.75 in. (400 mm)
Wall-mount brackets