Maintaining 39

DX-60D260A13
4Press ENTER to access the USB Photos menu. The USB
Photos menu opens.
5Press or to highlight Settings, then press
ENTER. The USB Photos Settings menu opens.
6Press or to highlight an option, then press
ENTER. You can select:
•Repeat—To repeat the slideshow when it
reaches the end. You can select On or Off.
•Shuffle—To display the photos in random order.
You ca n se lec t On or Off.
•Speed—To set the amount of time a photo is
displayed before the next photo is shown. You
can select 4 sec, 6 sec, or 8 sec.
•Transit ion—To select the way photos transition
when moving to the next file in the slideshow.
You ca n se lec t:
•None—for no transition effect.
•Fade to Bl ack—to fade the screen to black
between photos.
•Vertical Wipe—to wipe the screen from
top to bottom between photos.
•Horizontal Wipe—to wipe the screen from
left to right between photos.
•Random—To randomly select a transition
effect.
7Press EXIT to close the menu.
Maintaining
• Do no t use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 12 2°F (0° to 50°C).
• Working temperatures are 41° to 104°F (5° to 40°C).
• Do not place your TV in direct sunlight or near a heat
source.

Cleaning

• Before cleaning the screen, unplug your TV from the
power outlet.
• Clean your T V with a soft, lint-free cloth. If surfaces
are extremely dirty, use a soft cloth dampened with
a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never
use alcohol, paint thinner, or benzine.
• Before using a chemically treated cloth, read the
instructions that came with the cloth.
• Do not spray insecticide liquid near your T V. Such
chemicals may cause damage and discoloration to
the exposed surfaces.

Servicing

Do not try to repair your TV yourself. There are no
user-serviceable parts inside. Turn off your TV, unplug the
power cord, then contact an authorized service center.
Troubleshooting

Video and audio

Warning
Do not try to repair your TV yourself. Contact
authorized service personnel.
Problem Solution
Picture does not fill
the screen. There are
black bars around
the picture.
• Change the aspect ratio. An increasing
amount of digital TV and movies are
presented in wide screen (16:9). See
“Adjusting the TV picture” on page22.
No picture (screen is
not lit) and no
sound.
• Press on the TV or the remote control.
• Make sure that the video cables are
connected securely to the back of your TV.
• Adjust the contrast and brightness. See
“Adjusting the TV picture” on page22.
• Make sure that the power cord is plugged
in.
• Make sure that the correct video input
source is selected. See “Selecting the video
input source” on page20.
• Try another channel. The station may be
experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure that the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box” on
page9 or “Using coaxial cable (good)” on
page11.
• Check the closed caption settings. Some
TEXT modes can block the screen.
Picture quality is
good on some
channels and poor
on others. Sound is
good.
• The problem may be caused by a poor or
weak signal from the broadcaster or cable
TV provider.
• If you connect to cable or satellite TV
without a set-top box and experience poor
picture quality, you may need to install a
set-top box to improve signal reception and
picture quality. Contact your cable or
satellite TV provider about upgrading to a
set-top box.
12-1236_DX-60D260A13 MAN_V1_EN.book Page 39 Thursday, March 21, 2013 8:17 AM