Programming universal remote controls 43

DX-60D260A13
Programming universal remote controls

Programming a different universal

remote control

You can operate your Dynex TV with a new or existing
universal remote control.
To program a different universal remote control:
1See the table below for common codes. If you have
problems programming your remote or need a
different remote control code, visit
www.dynexproducts.com/remotecodes for the
latest remote control code information.
2Follow your universal remote control’s instructions
to enter the TV code you found in Step1.

For additional help and information…

1. Visit http://www.dynexproducts.com/remotecodes
2. Call technical support for the universal remote control
or cable/satellite company of the remote/set-top box you
are trying to program.
3. Call the Dynex Customer Care Center 1-800-305-2204

Common universal remote control codes

The following is a list of the most common remote control
codes. Codes for other remote controls a re available
online at: www.dynexproducts.com/remotecodes, or
check with your cable or satellite TV provide for the
remote control code.
Dynex TV codes for universal remote controls (for all
Dynex TVs manufactured after Jan. 1, 2007)
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measure
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Tips
• If your universal remote control has a code
search feature, run a code search to identify a
code that matches your TV. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn”
feature, you can manually program it using the
Dynex TV remote to “teach” the commands one
at a time. See your universal remote control’s
instructions for details.
Notes
• This note only goes with TV/Blu-ray or TVs.
• The following codes may not provide full
functionality. You may need to use the remote
control that came with your TV, especially to
control the Blu-ray or DVD functions.
Universal remote control makes and models
One for All 0054
Phillips 0198, 0490
RCA 135
Sony 068, 069, 078, 096, 100, 164,
168, 229, 026
Set-top box makes and models
Cablevision 068, 069, 078, 096, 100, 164,
168, 229, 026
Charter
2002, 1204, 1423, 1517, 0171,
1963, 0463, 1463, 0842, 1326,
167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast
10171, 11204, 11326, 11463,
11517, 11641, 11780, 11785,
11892, 11963, 12002
Cox 1326, 1463
DirectTV 10171, 11204, 11326, 11517,
11564, 11641, 11963, 12002
Dish Network 720
Time Warner 400, 450, 461, 456, 11463,
1463, 0463
TiVo 0091
Verizon 0198, 0490
Tips
• The brand name is often visible on the front of
the universal remote control, and the m odel
number is often visible on the back.
• If your universal remote contro l isn’t listed on
the chart, refer to your universal remote
control’s instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
12-1236_DX-60D260A13 MAN_V1_EN.book Page 43 Thursday, March 21, 2013 8:17 AM