Dynex DX-ESW5, DX-ESW8 manual Contact information, Problem Solution

DX-ESW5-ESW8.fm Page 5 Friday, April 29, 2005 4:25 PM

Dynex DX-ESW5 and DX-ESW8 Ethernet Switches				5
Troubleshooting
	Problem		Solution
	The power LED is not on.	• Make sure that the AC power adapter is correctly connected to an
			AC power outlet.
			• Make sure that the power source (such as a power strip, UPS, or
			surge protector) is on.
			• Make sure that you are using the AC power adapter supplied with
			your switch.
	A port’s Link/Act LED is		• Make sure that the network cable jacks are firmly plugged into the
	not on when a device is		switch and the device.
	connected to the port.		• Make sure that the connected device is on and that its adapter is
			installed correctly and is working.
			• Make sure that the cable is less than 328 feet (100 meters) long.
			• Try another cable that you know is good.

Contact information

For help with the installation or operation of the DX-ESW5 or DX-ESW8 switches, contact us at (800) 305-2204.

©2005 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trade- marks of their respective holders. Specifications and features are subject to change without notice or obligation.