Dynex DX-L24-10A Side, Back and side

6 DX-L24-10A TV components

Side

1

2

3

4

5

#	Component		Description
1	MENU		Press to open the on-screen menu.
2	INPUT		Press to select the video input source.
3	VOL	/VOL	Press to increase or decrease the volume.
4	CH	/CH	Press to go to the next or previous channel
			in the channel list.

5(Power) button Press to turn on your TV, or wake the TV up from DPMS mode. Press again to put your

TV in standby mode.

For more information, see “Turning your TV on or off“on page 12.

Back and side

23

4 5

1

				7	6
12	11	10	9	8

##	Component	Description
1	HDMI1 jack	Connect an HDMI device, such as a cable
		box or DVD player, to this jack. An HDMI
		cable carries both video and audio, so you
		do not need to make an audio connection.
		For more information, see “Connecting an
		HDMI device” on page 10.
2	VGA IN AUDIO/	Connect a computer to these jacks. For
	VGA IN PIC jacks	more information, see “Connecting a
		computer” on page 11.
3	Audio out jacks	Connect an analog sound system, such as
		an analog audio amplifier, to these jacks.
		See “Connecting an audio receiver or Dolby
		Digital 5.1 sound system” on page 11.
4	AV2 IN jack	Connect an AV device (video and audio) to
		these jacks. Match the color of the
		connectors to the color of the jacks (yellow
		for video, red for audio right, and white for
		audio left). For more information, see
		“Connecting a camcorder or game” on
		page 10.
5	HDMI2 jack	Connect an HDMI device, such as a cable
		box or DVD player, to this jack. An HDMI
		cable carries both video and audio, so you
		do not need to make an audio connection.
		For more information, see “Connecting an
		HDMI device” on page 10.
6	Service port	For software update only. Do not use.
7	Headphone jack	Plug headphones into this jack.
8	AV1 IN jacks	Connect an AV device (video and audio) to
		these jacks. Match the color of the
		connectors to the color of the jacks (yellow
		for video, red for audio right, and white for
		audio left). For more information, see
		“Connecting a camcorder or game” on
		page 10.
9	COMPONENT IN	Connect a component video device to
	jacks	these jacks. For more information, see
		“Connecting a component video device” on
		page 11.
10	S-VIDEO jack	Connect an S-Video device to this jack.
		S-Video does not carry an audio signal, so
		you will need to connect audio cables from
		the device to the AV1 audio jacks.