4

DX-L24-10A

Installing and removing the stand

3Insert the stand column into the TV stand and secure it with the stand column screws.

Stand groove

Screws

Stand column

4With the wider side of the stand facing down, align the tabs on the stand column with the holes on the stand, then gently push the stand toward the stand column until it clicks into place.

Tab

Stand

Wider side of stand facing down.

5Secure the stand with the four stand screws.

Stand screw holes (bottom view of stand)

Stand screws

Adjusting the viewing angle of the TV

To adjust the viewing angle:

Caution: When adjusting the angle, use caution to avoid slipping or tipping the TV.

3 10

Removing the stand

To remove the stand from the stand column:

1Lay your TV face down on a table or bench. Make sure that you put down a soft cushion or cloth so that your TV is not scratched).

2Adjust the stand so that the angle between the stand and the TV is 90°.

90

3Remove the four stand screws, then press the two black tabs on the bottom of the stand together and push them into the stand column and pull the stand off the stand column.

Tabs (bottom view of stand)

Stand screws

• Adjust the angle forward up to 3° and backward up to 10°.