
14 | Understanding the basics |
4Press to highlight Time Zone, then press
or
to select your time zone.
5Press to highlight DST (Daylight Saving Time), then
press or
to select On (to automatically change the time for Daylight Saving Time), or Off (to ignore it or set it yourself).
6Press to highlight Air/Cable, then press
or
to select Air or Cable, depending on the type of antenna connection you have.
7Press to highlight Auto Scan, then press ENTER or
to automatically scan for available channels.
Auto Scan may take a while to complete. A progress report is displayed while your TV is scanning for available channels. You can press MENU to exit Auto Scan prior to completion, but you will need to run Auto Scan later to complete the process.
Auto Scan creates a list of available/receivable channels for the selected signal input.
Understanding the basics
Turning your TV on or off
To turn your TV on or off (standby mode):1Plug the power cord into an AC power outlet.
2 Press (power). Your TV turns on.
3Press again to turn off your TV. When you turn off your TV, it goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the power cord.
Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Selecting the video input source
To select the video input source:1Turn on your TV, then press the INPUT key on the remote, or the INPUT button on the TV. The INPUT SOURCE menu opens.
2Press or
to highlight the video source, then press ENTER. You can also select the input source using the following remote control buttons:
•
•
•
•